1. 2. 3. material content data sheet sales product name IPD60R1K4C6 issued 29. september 2015 ma# ma001258366 package pg-to252-3-313 weight* 317.58 mg construction element material group substances cas# if applicable weight [mg] average mass [%] sum [%] average mass [ppm] sum [ppm] chip inorganic material silicon 7440-21-3 1.513 0.48 0.48 4765 4765 leadframe non noble metal iron 7439-89-6 0.147 0.05 464 inorganic material phosphorus 7723-14-0 0.044 0.01 139 non noble metal copper 7440-50-8 147.096 46.31 46.37 463175 463778 wire non noble metal aluminium 7429-90-5 0.499 0.16 0.16 1572 1572 encapsulation organic material carbon black 1333-86-4 1.422 0.45 4476 plastics epoxy resin - 24.877 7.83 78331 inorganic material silicondioxide 60676-86-0 115.854 36.48 44.76 364798 447605 leadfinish non noble metal tin 7440-31-5 3.787 1.19 1.19 11924 11924 plating inorganic material phosphorus 7723-14-0 0.003 0.00 11 non noble metal nickel 7440-02-0 1.421 0.45 0.45 4473 4484 solder noble metal silver 7440-22-4 0.043 0.01 135 non noble metal tin 7440-31-5 0.034 0.01 108 non noble metal lead 7439-92-1 1.640 0.52 0.54 5165 5408 heatspreader non noble metal iron 7439-89-6 0.019 0.01 60 inorganic material phosphorus 7723-14-0 0.006 0.00 18 non noble metal copper 7440-50-8 19.177 6.04 6.05 60386 60464 *deviation < 10% sum in total: 100.00 1000000 important remarks: infineon technologies ag provides full material declaration based on information provided by third parties and has taken and continues to take reasonable steps to provide representative and accurate information. infineon technologies ag and infineon technologies ag suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. all statements are based on our present knowledge, are provided 'as is' and may be subject to change at any time due to technical requirements and development without notification. this product is in compliance with eu directive 2011/65/eu (rohs) and contains pb according rohs exemption 7a, lead in high melting temperature type solders. company infineon technologies ag address 81726 mnchen internet www.infineon.com
|
